Large garages, long driveways and pool decks behind the gates, coated by a Simi Valley crew that works in Hidden Hills by appointment and builds every quote around your measured square footage.
SV Epoxy Flooring coats garage floors, driveways, patios and pool decks in Hidden Hills with epoxy and polyaspartic systems. A flake epoxy floor runs $6.50 to $10 per square foot, about $2,600 to $4,000 for a two-car garage up to 400 square feet, and installs in one day. Larger estate garages get a fixed written quote after a free estimate.
Hidden Hills is a gated city of 1,725 people and 635 housing units, and about 90 percent of those homes are owner-occupied. That makes it a small, settled community where people stay for years, and a floor finished here is a floor someone lives with for a long time. Typical lots run two acres behind white three-rail fences, so the houses, garages and outbuildings are built on a scale most of Southern California never sees. SV Epoxy Flooring works in Hidden Hills from our Simi Valley base, about eight miles away, and every property is treated as its own custom job rather than a template with an address swapped in.
A garage on a two-acre lot is often far larger than the 400 square foot two-car bay that most price lists assume. Floor area, not the number of doors, is what drives the cost. We measure the slab, check it for cracks and moisture, and recommend a flake epoxy floor, a metallic epoxy floor or a solid color epoxy floor depending on how the space is used, whether that is daily parking, a car collection or a workshop. If you are weighing how much does epoxy cost for a space this size, the answer comes from the square footage, and we put it in writing.
Every Hidden Hills job follows the same preparation. Diamond grinding opens the concrete and creates a bonding profile, cracks are repaired, a moisture-barrier epoxy basecoat goes down where the slab needs it, and a UV-stable polyaspartic topcoat finishes the surface. The materials are VOC-free, and residential floors carry a limited lifetime adhesion warranty. A free estimate gets a same-day reply and a fixed written quote, with the schedule agreed in advance so access through the gate is arranged before the crew arrives. You will know the day, the start time and the cure window before we touch the slab.
We install floors throughout Hidden Hills and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of Hidden Hills
Summer highs in Hidden Hills average about 85 to 93 degrees from June through September, and the community receives about 23.5 inches of rain a year, which is more than neighboring Simi Valley sees. That combination is hard on bare concrete. Summer sun bakes driveways and pool decks, which raises the risk of hot-tire pickup on weak coatings, while winter rain keeps slabs damp and makes smooth surfaces slick. Rain also means more moisture moving up through slab-on-grade floors, which is why we test before choosing a basecoat. Our UV-stable polyaspartic topcoat holds its color in the sun, a moisture-barrier epoxy basecoat goes under floors that need it, and textured finishes add traction wherever water gathers.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Most flooring quotes quietly assume a two-car garage. On a two-acre lot the garage can look nothing like that, and a larger slab changes the job in useful ways. We can work the floor in zones, keep the flake broadcast even across a long span, and run a metallic epoxy floor the full length of a car room as one continuous design. It also changes the math. A flake epoxy floor is $6.50 to $10 per square foot and a metallic epoxy floor is $12.50 to $18.50, so we price your garage by measured area and write the number down before work starts. Older garages often carry decades of oil, tire marks and patched cracks. Diamond grinding removes all of it and gives the new coating a clean surface to grip, and crack repair comes before any color goes down. Flake installs in one day, solid color takes three days and metallic takes three to four, which matters when the garage is also the main way in and out of the house. Browse the color chart early, because gray, charcoal and warm neutral blends are easy to coordinate with stone, stucco and painted cabinetry. Samples help, so ask us to bring chips to the slab and judge them in your own garage light.
Outdoor concrete is where Hidden Hills homes show their age fastest. Pool decks and patios take direct sun, and long driveways carry hot tires every day, so a quartz or sand finish under a UV-stable polyaspartic topcoat is the system we reach for. Outdoor concrete work is quoted at $8 to $12 per square foot, about $3,200 to $4,800 for a typical project, and the textured surface gives wet feet real grip. Before any exterior or driveway job, confirm approvals. The Hidden Hills Community Association's Architectural Standards, adopted in May 2008, say nearly every aspect of a property falls under the Architectural Committee, and two bodies govern the community, the City of Hidden Hills and the Community Association. We cannot tell you what your lot allows, so ask the owner or the association first, and we will supply finish details, color samples and written product information to support a request. Once approved, we schedule the work around your plans, keep equipment off planting beds, and hose the finished slab clean before we leave. Pool deck coatings also clean up quickly with a hose, which saves time when leaves and dust collect on large decks. If steps or walkways connect the house to the pool, we coat those in the same pass so the whole route has matching grip.
Hidden Hills is a residential city with no business district, so we want to be straightforward about what commercial work means here. It is rarely a warehouse or a storefront. More often it is private-estate work done to a commercial standard: a detached workshop, a service area for the household, a showroom-style car room, or a studio or gym floor that sees constant traffic. Those spaces get the same systems we install in shops and offices, a solid color epoxy floor for easy cleaning, a metallic epoxy floor where appearance matters, or a grind and seal finish when the budget is tight and the slab is in good shape. Grind and seal runs $6.50 to $9 per square foot, with projects at about $2,600 to $3,600. If you manage a business project nearby, we also work in Calabasas, Agoura Hills and Chatsworth, and commercial floors are quoted after a site visit. Tell us the square footage, the traffic, how heavy the equipment is and any hours when the property needs to stay quiet, and we will build the schedule around them. Heavy tool chests, lifts and show cars are all fine on a properly cured floor, and we explain the cure window before we leave.
A two-car flake epoxy garage floor in Simi Valley typically costs $2,600 to $4,000 for up to 400 square feet, or $6.50 to $10 per square foot. Our minimum project is $2,600. Solid color starts at $3,800, metallic runs $12.50 to $18.50 per square foot, and larger garages cost more because pricing follows square footage.
Read the answer →Yes, for most Simi Valley homeowners an epoxy garage floor is worth it when it is built properly: diamond ground, moisture tested and finished with a UV-stable topcoat. It ends concrete dust, resists oil and hot tires, and mops clean. It is not worth it over an unresolved moisture problem or with a thin, cheap coat.
Read the answer →Epoxy garage floors fail mainly from peeling, hot-tire pickup, yellowing, bubbling and slipperiness. Nearly all trace back to skipped prep, moisture in the slab or the wrong topcoat. Diamond grinding, a moisture test, a moisture-barrier basecoat and a UV-stable polyaspartic topcoat prevent most of them before the first coat goes on.
Read the answer →A well-installed epoxy floor in Simi Valley should still look clean and intact after five years, with some gloss dulling in tire paths, light surface scratches and little color change under a UV-stable topcoat. Peeling, bubbling or lifting at five years points to a prep or moisture problem, not normal wear.
Read the answer →Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
A flake epoxy floor costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Metallic runs $12.50 to $18.50 per square foot. Because many Hidden Hills garages are larger than 400 square feet, we measure first and give you a fixed written quote after a free estimate. Each quote spells out the scope of work, so you know exactly what the price covers.
Confirm approval first. The Hidden Hills Community Association's Architectural Standards say nearly every aspect of a property falls under the Architectural Committee, so check with the owner or association before exterior or driveway work. We provide color samples, finish details and product information to support your request, but we cannot approve a project for you, and we will not start exterior work until you confirm it is cleared.
A standard flake epoxy garage floor takes one day. Larger estate garages may take longer because of the square footage, and we confirm the schedule in your written quote. Flake stays the fastest option, so it suits owners who need the garage back quickly. Solid color takes three days, metallic takes three to four days, and quartz or sand finish takes two to three days. We tell you exactly when you can walk and park on it, and a weekday start keeps the schedule simple.
Yes. Diamond grinding removes surface oil, old sealer and loose material, and we repair cracks before coating. Deep oil can still show faintly under a thin coating, so we explain what to expect during the estimate, and we show you the worst spots on site before we quote. Flake and metallic systems hide most remaining marks, and the result is far easier to clean than bare concrete.
Yes, when the system is built for it. We use a quartz or sand finish under a UV-stable polyaspartic topcoat, which resists fading and hot-tire pickup. Outdoor work carries a 3-year warranty. Good surface prep matters most, so we grind the concrete and repair cracks before any coating goes on. A textured finish also keeps wet feet from sliding near the water.
A flake epoxy floor is a full-rejection broadcast of colored chips that hides dust and flaws and installs in one day. A metallic epoxy floor is a marbleized, poured finish that takes three to four days and costs more per square foot. Flake is the practical choice, while metallic suits showpiece garages and car rooms. Both are sealed with the same UV-stable polyaspartic topcoat, and our color chart shows the options side by side.
Yes. We work in Hidden Hills from our Simi Valley base and arrange gate access with you in advance. Call (805) 697-5483 or use the form to book a free estimate. You get a same-day reply, an on-site look at the slab, and a fixed written quote. We are open Monday to Friday and Sunday, 8 AM to 5 PM, and closed Saturday.