From Hillrise-era tract garages to Old Agoura patios, SV Epoxy Flooring coats Agoura Hills concrete a short drive from our Simi Valley base.
SV Epoxy Flooring installs flake, solid color, metallic and quartz epoxy floors in Agoura Hills garages, patios, pool decks and small commercial spaces. A two-car flake garage floor takes one day and costs $2,600 to $4,000. Every floor uses VOC-free materials, a UV-stable topcoat and a limited lifetime adhesion warranty.
Agoura Hills grew up after the Ventura Freeway arrived in the late 1960s, and the city still shows its tract-building history. Hillrise, Liberty Canyon and Lake Lindero were the first tracts, and large-scale building followed in the 1980s. That means many Agoura Hills garages sit on slabs that are forty to fifty years old, with decades of oil drips, tire marks and hairline cracks. SV Epoxy Flooring works in Agoura Hills from our Simi Valley base, and old slabs like these are exactly where careful diamond grinding and crack repair make the difference between a floor that peels and a floor that lasts.
Whether your home is in Old Agoura, Lake Lindero, Morrison Ranch, Liberty Canyon, East Agoura, the Historic Quarter, the South End or near Malibu Junction, the process is the same. We start with a free estimate at your property. We measure the floor, test the concrete for moisture, look at the cracks and walk you through finishes. You get a same-day reply and a fixed written quote, so you know the cost and the schedule before any material is ordered. About three quarters of Agoura Hills homes are owner-occupied, so most of the floors we quote are meant to last for years.
Most Agoura Hills garages end up with a flake epoxy floor, because it hides dust, adds grip and installs in a single day. A metallic epoxy floor takes three to four days and suits homeowners who want something dramatic. A solid color epoxy floor takes three days and keeps things clean and simple, while a quartz finish takes two to three days and works well outside. Look through our color chart, then ask for a quote. Our materials are VOC-free, so the house is not full of strong fumes while the floor cures. Whichever system you choose, we explain the steps, the timing and the upkeep before we start.
We install floors throughout Agoura Hills and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of Agoura Hills
Agoura Hills has mean daily highs near 78 degrees and about 18.4 inches of rain a year, most of it from November through March. That wet season matters for outdoor slabs, because water sits on bare concrete and works into hairline cracks. Summer sun then bakes the same surface, so we finish exterior work with a UV-stable polyaspartic topcoat. Santa Ana winds drove the 2018 Woolsey Fire through the community, and ash and fine dust can settle on any open slab afterward. We grind and vacuum the surface right before coating, so the bonding profile is clean when the first coat goes down.
Garages poured in the Hillrise, Liberty Canyon and Lake Lindero era were built before anyone thought of them as living space. Today they hold bikes, freezers, workbenches and two cars, and the original slab shows it. Expect oil spots, pitted patches from old sealers and cracks that have been there for years. We begin with diamond grinding, which removes the weak surface layer and creates the bonding profile a coating needs. Cracks are cut, filled and leveled, and a moisture-barrier epoxy basecoat goes down where the slab calls for it. Then comes a full-rejection flake broadcast, a scrape, and a UV-stable polyaspartic topcoat. A standard two-car flake epoxy floor is finished in one day, runs $6.50 to $10 per square foot, and lands between $2,600 and $4,000 for garages up to 400 square feet. If you want a deeper, more dramatic look, a metallic epoxy floor takes three to four days. Browse the color chart first, and if your tract has a homeowners association, check its guidelines before choosing a color. Hairline cracks in slabs this age are normal, and filling them before coating keeps them from showing through the finish. We also check whether the floor slopes toward the door, because that affects how we level the surface and how water runs off when you rinse it.
Outdoor concrete in Agoura Hills lives through two very different seasons. Winter rain soaks bare slabs and works into small cracks, then summer sun bakes and fades the same surface. A coating that handles both needs good prep and a UV-stable topcoat. For a patio or pool deck we usually recommend a quartz or sand finish, which takes two to three days and leaves a textured, slip-conscious surface that stays comfortable underfoot when it is wet. Driveways need the same toughness plus resistance to hot-tire pickup, so we pay close attention to cure conditions and surface preparation. Outdoor concrete coatings run $8 to $12 per square foot, which is about $3,200 to $4,800 for typical projects, and they carry a three-year warranty. Lighter colors reflect more heat than dark ones, so we show samples against your own concrete before you decide. Coated concrete also rinses clean with a hose, which helps after a dusty week or after leaves and storm debris wash across the yard. Stairs and steps get extra attention because they take the most wear and the most wet feet. We seal along edges and joints so water has fewer places to creep under the coating, and we explain how to care for the surface through your first rainy season. A quick rinse is usually all it needs.
Agoura Hills is mostly a residential city, so we expect most commercial calls to be small. That means home offices, garage studios, small retail spaces, storage rooms and workshops, not large warehouses. The area has a creative past, since Paramount Ranch was used to film Westerns and the community was briefly called Picture City in the 1920s, and a polished metallic epoxy floor or a clean solid color epoxy floor suits a studio or showroom well. For any commercial floor we visit the space, measure it, ask about traffic, chemicals and washdowns, and quote the job after that site visit. We can add a cove base where the floor meets the wall, so the surface wipes clean without open seams. Business spaces carry a three-year warranty, and we plan the schedule around your hours, working in zones when part of the space has to stay open. If you rent, check with your landlord before we start. If you work from home, a seamless floor also solves small daily annoyances, like chair casters scuffing bare concrete or dust rising from a dry slab. Tell us how the room will be used and we will pick a finish that fits, whether that is a quiet satin look, a bright gloss or a textured surface for safety.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
You can usually walk on a new epoxy floor within a day, but driving on it takes longer and depends on the system, the products and the temperature. Your installer should give you exact times at the walkthrough. Full chemical cure takes about a week, so treat the floor gently until then.
Read the answer →Yes, a properly installed epoxy garage floor holds up in Simi Valley heat. The risks come from poor prep, an epoxy-only topcoat that amber-tints in sun, and hot tires on a weak bond. A diamond-ground slab, a moisture-barrier basecoat and a UV-stable polyaspartic topcoat handle summer well.
Read the answer →Yes, in most cases you can epoxy over old concrete, but not over the problem itself. Cracks are repaired, joints are treated, oil is ground and cleaned out, old coatings are tested or removed, and moisture is checked first. The coating is only as good as what it bonds to.
Read the answer →We cannot give you a rule for every address, because requirements depend on your HOA and on the city. A coating is a surface finish, not structural work, but you should confirm it. Read your HOA documents, call the Simi Valley Building and Safety office, and get the answer in writing before you book.
Read the answer →A two-car flake epoxy garage floor up to 400 square feet costs $2,600 to $4,000, or $6.50 to $10 per square foot. Solid color starts at $3,800, metallic runs $5,000 to $7,400, and quartz runs $3,600 to $6,600. Our minimum project is $2,600. You get a fixed written quote after a free on-site estimate. Prices stay within those ranges unless the slab needs unusual repair, and we tell you that before work starts. A three-car or oversized garage costs more simply because it has more square feet.
Yes. Older slabs are common in Agoura Hills and they coat well when the prep is done properly. We diamond grind away old sealer, stains and the weak surface layer, repair cracks, and test for moisture. A moisture-barrier epoxy basecoat goes on if the slab needs it. Skipping that prep is the main reason coatings peel, so we never rush it. Sound concrete is the starting point, and we flag any structural cracks before quoting.
It depends on your community, so check your HOA documents first. An interior garage floor is often treated differently from exterior work, but we cannot confirm that for any specific association. Driveways and patios are more likely to be reviewed. We can provide a spec sheet and a color sample to include with your architectural request. Ask your management company or board which form they want, and we will fill in the product details.
A flake epoxy floor takes one day. A quartz or sand finish takes two to three days, solid color takes three days, and metallic takes three to four days. We prep, coat and topcoat on a set schedule, and before we leave we tell you when you can walk on the floor and when the cars can return. Larger or more complex jobs may take longer, and we confirm the timeline in your written quote. Weather matters for outdoor jobs, so we confirm the dates with you before we arrive.
It can, which is why we prep right before coating. Ash and fine dust sitting on a slab weaken the bond, so we diamond grind and vacuum the surface immediately before the basecoat goes down. A sealed epoxy floor also wipes clean afterward, which helps whenever dust or ash blows into a garage or onto a patio. If you think your slab has seen a lot of smoke residue or dust, mention it at the estimate and we will plan the prep around it.
A quartz or sand finish under a UV-stable polyaspartic topcoat is our usual pick. It gives a textured, slip-conscious surface and holds up to sun and winter rain. Outdoor concrete coatings run $8 to $12 per square foot, about $3,200 to $4,800 for typical jobs, and they carry a three-year warranty. Slip-resistant additive can be added to the topcoat for extra grip, and we talk through texture before the job. Lighter shades keep the surface more comfortable on hot afternoons, and we bring samples.
Yes. We work in all three Agoura Hills ZIP codes, 91301, 91376 and 91377, a short drive from our Simi Valley base. That includes Old Agoura, Lake Lindero, Liberty Canyon and the rest of the city. Call (805) 697-5483 or request a free estimate and we reply the same day. The estimate is free and the quote is a fixed price. We accept cash, check and credit card. Hours are Monday through Friday and Sunday, 8 AM to 5 PM.
Call (805) 697-5483 or send the form at the top of the page. We reply the same day with a time to measure.