Colored quartz or fine sand locked under a UV-stable topcoat gives your floor real grip, a dense textured look and a surface that hides everyday wear well.
A quartz and sand finish is a textured epoxy floor made by broadcasting colored quartz or fine sand into resin twice, then sealing it with a topcoat. It grips far better than a smooth coating and hides wear well. SV Epoxy Flooring installs it in 2-3 days, from $9 to $16.50 per square foot.
Most epoxy floors are chosen for how they look. A quartz or sand finish is chosen just as much for how it feels underfoot. Graded grains are broadcast into the resin, so instead of a slick sheet you get a fine, even texture that grips a shoe sole and a wet tire tread. In Simi Valley that matters on the garage floor that gets hosed down after yard work, the back patio, the steps up to a hillside yard, and the shop or kitchen where something spills every day.
People often mix up the two versions of this system. A quartz finish uses colored quartz grains under a clear topcoat, so the color you see is the color of the stone itself: speckled, rich and steady in bright sun. A sand finish uses neutral sand under a pigmented topcoat, so the coating supplies the color and the sand supplies the traction. Both are built with a double broadcast, and both suit places where grip matters more than a mirror shine.
SV Epoxy Flooring is a service-area business based in Simi Valley. We install these floors for homes and businesses in Moorpark, Thousand Oaks, Camarillo, Oxnard and the rest of our service areas. This page explains how the system is built, what it costs, where it works best and where another system would serve you better. Every job starts with a free estimate and ends with a fixed written quote, so you know the number before any work begins.
The job starts the way every lasting floor does, with diamond grinding. The grinder opens the pores of the concrete and creates the bonding profile the resin needs. It also removes old sealer, paint and the chalky skin that many tract-home garage slabs carry. Cracks and chipped edges are filled and ground flush, and a moisture check tells us whether a moisture-barrier epoxy basecoat (MVB) should go down before anything else. Next the basecoat is rolled out and covered by hand with quartz or sand until the wet resin cannot take any more. That is the first broadcast. Once it firms, the loose excess is scraped and vacuumed away, and a second coat of resin locks in what is left. A second broadcast follows, then another scrape and vacuum, which leaves a dense, even, gritty surface. The last step is a UV-stable polyaspartic topcoat that seals the grains in place and softens their sharp edges. Two broadcasts are why this floor is thicker and more textured than a flake epoxy floor, and also why it takes 2-3 days rather than one. Each layer has to firm before the next goes on, and rushing that sequence is where most coating failures begin.
With a quartz finish, the grains are manufactured blends of colored quartz, from soft neutral stone tones to deeper slate and earth mixes. Because the color lives in the grain, only a clear topcoat is needed, and the floor reads as a layered, stone-like surface rather than a painted one. Sun does not bleach the grains, which helps on driveways and covered patios that take strong afternoon light. A sand finish uses clean sand for texture and a pigmented topcoat for one even color. It suits people who want the look of a solid color epoxy floor with real traction, such as stair treads, ramps or a garage apron. Pigmented topcoats are the more economical route over large areas, but the color sits in a thin film, so scratches can show sooner than they do in a quartz floor. Dark blends hide dust and tire dirt well. Very light blends brighten a space but show oil and grime sooner. The color chart is the place to start, yet a small sample looks different from a full floor, so ask for samples at the free estimate and hold them against your walls, cabinets and lighting.
Simi Valley has dry, sunny weather for much of the year, then the occasional rain that turns a smooth surface slick. A textured floor handles both. Garages are the most common job, especially where the driveway slopes toward the door and wet tires roll in. Back patios, side yards and walkways on hillside lots are another, since a gentle slope plus a morning sprinkler cycle can make smooth concrete treacherous. Stairs and landings gain a lot from the added traction, and a sand finish can be carried across the nosing for a safer edge. Inside, quartz suits commercial kitchens, laundry rooms, workshop bays and mudrooms in homes from Moorpark to Camarillo. Santa Ana wind seasons add fine dust to any open garage, and the grain pattern in a quartz floor hides that dust far better than a gloss solid color. For pool decks, we have a separate outdoor system, but a quartz build is often part of it. It is not the right pick for a showroom where you want a glassy, easy-wipe shine. In that case a smooth solid or metallic floor will serve you better. Business owners in the industrial parks of Simi Valley and Camarillo also ask for it at loading doors and wash-down corners, where wet boots and rolling carts meet.
Texture is a trade. You gain grip and camouflage, and you give up some of the effortless wipe that a smooth coating has. Grains create tiny peaks, so dirt can settle between them, and a soft push broom or a deck brush with a neutral cleaner does the job better than a flat mop. A pressure washer on a low setting works for outdoor floors, and a wet vacuum helps indoors. Because the topcoat is the only thing standing over the grains, it is the layer that wears. In a busy shop, forklift turns and dragged steel can scuff it, which is why we can add a second topcoat where traffic is heavy. A quartz floor is also more expensive than a basic flake finish because it uses more material and more labor. Those are the downsides of epoxy in this category, and we would rather you hear them now. Ask about how epoxy looks after five years if you want real expectations. With good prep, the limited lifetime adhesion warranty on residential work covers the bond itself, and normal wear is something the quote explains in plain words. If you want a feel for the finish before you decide, ask to see a finished sample at the estimate.
The grains give the surface a built-in texture, so shoes and tires hold on better than they do on smooth gloss, even when the floor is damp.
Speckled quartz and sand break up the eye, so tire tracks, dust and light scuffs are far less noticeable between cleanings.
Two broadcasts and a sealing topcoat make a heavier system than a standard flake floor, which helps it stand up to heavy use.
Quartz grains are stone, so their color does not fade under the sun, and a UV-stable polyaspartic topcoat protects the surface above them.
The dense texture masks small surface flaws and patched cracks that would show through a thin gloss coating.
Residential floors carry a limited lifetime adhesion warranty on the bond between coating and concrete, and outdoor and commercial work carries 3 years.
A quartz or sand finish takes 2-3 days from the first pass of the grinder to the final topcoat. Day one covers grinding, repairs and the first basecoat and broadcast. The next day or two build the second broadcast and the topcoat, with firm time built in between each layer. Most floors take light foot traffic the day after the topcoat goes down. Vehicles usually wait a few more days, and heavy furniture or tool chests are best held off a little longer. Cool or humid mornings can stretch a layer, so your installer gives you a plan that matches the weather on the day and the slab in front of them. Because the grains sit in several layers, we also like to leave a little extra time before the first heavy cleaning, so the topcoat has finished hardening around every grain.
Choose a quartz or sand finish when traction, a textured look and hiding wear matter most. A flake epoxy floor is faster, finishing in one day, and costs less. A solid color epoxy floor is the smoothest and easiest to wipe, but it can be slick when wet. A metallic epoxy floor gives dramatic depth, though it shows scratches and is not meant for wet, high-traction areas. Grind and seal is the leanest choice if you only want protected concrete. Quartz sits in the middle of the price range and at the top for grip. If your main worry is a wet or sloped surface, start here. If your main worry is budget on a dry two-car garage, start with flake and compare the two quotes side by side.
Typical ranges for Simi Valley and Ventura County. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate. See the color chart to pick your color.
Yes, for most Simi Valley homeowners an epoxy garage floor is worth it when it is built properly: diamond ground, moisture tested and finished with a UV-stable topcoat. It ends concrete dust, resists oil and hot tires, and mops clean. It is not worth it over an unresolved moisture problem or with a thin, cheap coat.
Read the answer →We cannot give you a rule for every address, because requirements depend on your HOA and on the city. A coating is a surface finish, not structural work, but you should confirm it. Read your HOA documents, call the Simi Valley Building and Safety office, and get the answer in writing before you book.
Read the answer →You can usually walk on a new epoxy floor within a day, but driving on it takes longer and depends on the system, the products and the temperature. Your installer should give you exact times at the walkthrough. Full chemical cure takes about a week, so treat the floor gently until then.
Read the answer →A quartz epoxy floor is a resin system with colored quartz grains broadcast into it, then sealed by a clear topcoat. The result is a dense, textured, speckled surface with natural stone color. At SV Epoxy Flooring it is built with two broadcasts over a diamond-ground slab, so it is thicker than a typical flake finish.
A quartz or sand finish runs $9 to $16.50 per square foot, which usually puts a project between $3,600 and $6,600. Our minimum project is $2,600. Size, slab condition, the number of cracks to repair and any stairs or borders move the price, and the fixed written quote after a free estimate spells it out.
Yes, it is one of the more slip-resistant choices we install. The graded grains create a fine texture that grips shoes and tires, including when the floor is wet. No coating is slip-proof, and a finer or coarser grain changes how it feels, so ask to see samples and we will match the texture to how the space is used.
Quartz uses harder, finer grains with two broadcasts, so it is thicker, more textured and grippier. Flake uses larger vinyl chips in a single broadcast, so it installs in one day and costs less. Quartz suits wet areas, stairs and tough use. Flake is the better value for a typical dry garage.
A sand finish is a textured epoxy floor where clean sand is broadcast into the resin and a pigmented topcoat supplies one even color. You get the look of a solid color floor with much better traction. It is a common choice for stairs, ramps, entries and areas that see water.
A well-prepared quartz floor can give many years of service, and the speckled surface hides wear well. Real life depends on prep, traffic, sun exposure and how it is cleaned, so we avoid promising a number of years. What we do promise is a limited lifetime adhesion warranty on residential work.
Yes, texture is exactly why it works in those places. Quartz and sand builds provide traction on wet surfaces, and a UV-stable topcoat holds up in sun. Pool decks and patios need an outdoor-specific system with proper crack prep, and kitchens often need cove base. Outdoor and commercial work carries a 3-year warranty.
Slightly, yes. The grains hold a little more dust than a gloss surface, so sweeping or a soft deck brush works better than a flat mop. A neutral cleaner and warm water are enough for most spills. Hot water and a brush handle greasy shop floors, and a wet vacuum removes the rinse water.
Yes, and stairs are one of the best uses for it. A quartz or sand build gives each tread and landing a gripping texture, and the grains can be carried over the nosing. We prep every step by grinding, repair chips along the edges and seal the finish with a UV-stable topcoat.
Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Call (805) 697-5483 or send the form at the top of the page. We reply the same day with a time to measure.