Showroom-quality garage floors, pool decks and studio floors for Calabasas homes, installed by SV Epoxy Flooring from our nearby Simi Valley base.
SV Epoxy Flooring installs metallic, flake, solid color and quartz epoxy floors in Calabasas garages, pool decks, patios and studios. Flake garage floors take one day and cost $2,600 to $4,000 for two cars, while metallic floors take three to four days. All residential floors carry a limited lifetime adhesion warranty.
Calabasas is organized around its roads. Calabasas Hills, Calabasas Park Estates, Westridge, Vista Point and The Oaks sit off Parkway Calabasas. Mulholland Heights, Calabasas Highlands and Park Moderne run off Mulholland Highway, and The Colony and Mont Calabasas branch off Las Virgenes Road. Each pocket has its own lot sizes, its own garages and often its own set of community guidelines. SV Epoxy Flooring works in Calabasas from our Simi Valley base, a short drive away, and we plan every quote around your specific home and garage instead of handing you a one-size answer. We also check access to your garage so we can plan equipment and materials.
The 2020 census counted 9,289 housing units in Calabasas, and 70.2% of occupied homes are owner-occupied, with a 2023 median household income of about $158,000. When people own their homes and plan to keep them, the garage often becomes a space with a real job. It may be a gym, a workshop, a display area for a favorite car or simply the place where everything lands. We build the floor to match that job. The finish should look intentional, with clean edges, even color and a surface that is easy to wipe down, and it should still look good years from now.
Most Calabasas homeowners compare a flake epoxy floor with a metallic epoxy floor. Flake installs in one day, hides dust and adds grip. Metallic takes three to four days and gives a deep, marbleized look that no two garages share. A solid color epoxy floor takes three days, and a quartz finish takes two to three days and works well outdoors. Browse the color chart, then ask for a free estimate. We reply the same day, and the written quote you receive is a fixed price. Whatever finish you pick, you will know the steps, the timing and the care routine before we begin.
A Calabasas garage floor is often seen every day and shown off to guests, so the finish matters. For a clean, quiet look, a solid color epoxy floor in a soft gray or charcoal gives you a seamless surface that photographs well and wipes clean in minutes. For something with more depth, a metallic epoxy floor uses pigments that swirl and pool across the slab, and it costs $12.50 to $18.50 per square foot, or about $5,000 to $7,400 for a typical two-car garage. A flake epoxy floor is the practical favorite at $6.50 to $10 per square foot and finishes in a single day. Every system starts with diamond grinding to create a bonding profile, crack repair, and a moisture-barrier epoxy basecoat where the slab needs one. A UV-stable polyaspartic topcoat finishes the job and resists hot-tire pickup. If you are asking how much does epoxy cost for your exact garage, we measure it at the free estimate and give you a fixed number. Check any community or HOA guidelines before choosing a color. Garages that double as gyms or workshops see dropped weights, tools and heavy foot traffic, so tell us how you use the space and we will match the system to it. Glossy floors also reflect your lights, walls and cabinets, and we show samples under your own lighting.
Calabasas runs hotter than the coast, and that changes how an outdoor surface should be built. Bare concrete around a pool can feel punishing on a July afternoon, and it gets slick when splashed. We usually recommend a quartz or sand finish for a pool deck or patio, installed in two to three days, because the texture gives your feet traction and the topcoat stays stable under strong sun. Lighter colors reflect more heat than dark ones, and we bring samples so you can compare them on your own slab. Outdoor concrete coatings, including patios, driveways, pool decks and stairs, run $8 to $12 per square foot, which is roughly $3,200 to $4,800 for typical projects, and they carry a three-year warranty. Driveways get the same attention to prep and cure time, since hot-tire pickup is the usual complaint with poorly prepared coatings. Before we begin, we look at drainage, cracks and expansion joints, and we explain what can be coated and what needs repair first. Stairs, steps and pool deck edges wear fastest, so we seal along joints and edges to give water fewer places to creep beneath the coating. Keep traffic and furniture off the surface until we say it has cured, and after that a rinse with a hose and mild soap is usually all the upkeep it needs.
Calabasas is largely a residential city, so the commercial work we expect here is smaller than a warehouse project. It tends to be home offices, creative studios, boutique retail, storage rooms and finished workshops. The city even has a film connection, since the Calabasas Park Golf Club sits on the former Warner Bros. Ranch. A seamless solid color epoxy floor suits an office or studio because there are no grout lines to collect dust, and a metallic floor can turn a small showroom into a design statement. For any commercial floor we visit the space, ask about traffic, equipment and washdowns, and quote the job after that site visit. We can add a cove base so the floor curves up the wall and cleans without open seams, and we schedule around your hours, working in zones if part of the space needs to stay open. Business floors carry a three-year warranty. If you lease the space, get your landlord's approval before work starts. A seamless floor also solves small daily problems, like chair casters scuffing bare concrete or dust rising from a dry slab. Tell us how the room will be used and we will pick a finish that fits, whether that is a quiet satin look, a bright gloss or a textured surface for safety.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
We install floors throughout Calabasas and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of Calabasas
Calabasas has a hot-summer Mediterranean climate with about 17.77 inches of rain a year, and inland Calabasas runs hotter than the coast. Heat is the main design factor, so we choose UV-stable polyaspartic topcoats that stay clear and glossy under strong sun and resist hot-tire pickup. The 2018 Woolsey Fire crossed U.S. 101 near Calabasas and damaged Grape Arbor Park, and ash or fine dust that settles on a slab weakens a bond. We grind and vacuum right before the first coat so the surface is clean. Hot-tire pickup is the most common complaint with poorly prepared coatings, and heat is exactly what causes it. Lighter colors and a stable topcoat help the surface stay comfortable and clear.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
A two-car flake epoxy garage floor in Simi Valley typically costs $2,600 to $4,000 for up to 400 square feet, or $6.50 to $10 per square foot. Our minimum project is $2,600. Solid color starts at $3,800, metallic runs $12.50 to $18.50 per square foot, and larger garages cost more because pricing follows square footage.
Read the answer →Yes, for most Simi Valley homeowners an epoxy garage floor is worth it when it is built properly: diamond ground, moisture tested and finished with a UV-stable topcoat. It ends concrete dust, resists oil and hot tires, and mops clean. It is not worth it over an unresolved moisture problem or with a thin, cheap coat.
Read the answer →Epoxy garage floors fail mainly from peeling, hot-tire pickup, yellowing, bubbling and slipperiness. Nearly all trace back to skipped prep, moisture in the slab or the wrong topcoat. Diamond grinding, a moisture test, a moisture-barrier basecoat and a UV-stable polyaspartic topcoat prevent most of them before the first coat goes on.
Read the answer →A well-installed epoxy floor in Simi Valley should still look clean and intact after five years, with some gloss dulling in tire paths, light surface scratches and little color change under a UV-stable topcoat. Peeling, bubbling or lifting at five years points to a prep or moisture problem, not normal wear.
Read the answer →A metallic epoxy floor costs $12.50 to $18.50 per square foot, which is about $5,000 to $7,400 for a typical two-car garage. It takes three to four days to install. Flake is the lower-cost option at $6.50 to $10 per square foot. We give you a fixed written quote after a free estimate. Prices stay in those ranges unless a slab needs unusual repair, and we say so before work starts. Bigger garages cost more only because they have more square feet to coat.
It depends on the look you want. Metallic gives the most dramatic, one-of-a-kind finish. Solid color is clean and modern. Flake is the most practical because it hides dust and small flaws and adds grip. We bring samples to the free estimate so you can compare them against your own walls, cabinets and lighting. Choosing a finish is easier when you can see it, so ask for samples and show us a photo of your garage. We will tell you honestly which finish suits your space.
Some may, so check your HOA or community guidelines first. We cannot say what any specific association requires. Exterior items such as driveways and patios are more likely to be reviewed than an interior garage floor. We can supply a spec sheet and color sample to support your architectural request. Ask your management company which form they want, and we will fill in the product details. Ask early, because approvals can take time.
Not when the system is built for it. Calabasas gets hot summers, so we finish with a UV-stable polyaspartic topcoat that resists yellowing and hot-tire pickup. Proper diamond grinding and a full cure matter just as much. Cheap garage paint is what peels and lifts under hot tires, not a professionally installed system. A full cure matters, so we ask you to follow our care instructions after the install. Light colors also stay a little cooler in the sun, and we bring samples.
Residential floors carry a limited lifetime adhesion warranty, and commercial and outdoor floors carry a three-year warranty. Adhesion means the coating stays bonded to the concrete. We explain exactly what is covered in writing before the job starts, along with simple care steps that help your floor look new for years. Keep your quote and receipt, and call us with any care questions after the job. Care is simple: sweep, mop with mild soap and avoid harsh abrasive cleaners.
Yes. Pool decks are a regular job for us. We recommend a quartz or sand finish for traction, topped with a UV-stable polyaspartic coat. Typical outdoor projects run $8 to $12 per square foot and take two to three days. We check cracks and drainage first, and we point out any repairs needed before coating. We also coat steps and walkways around the pool so the whole area matches. Outdoor work depends on the weather, so we confirm dates with you ahead of time.
Yes. We work in both Calabasas ZIP codes, 91301 and 91302, a short drive from our Simi Valley base. We take calls Monday through Friday and Sunday from 8 AM to 5 PM at (805) 697-5483. Request a free estimate and we reply the same day with a time to visit. We accept cash, check and credit card. The estimate is free and the quote is a fixed price. We cover Calabasas Park Estates, The Oaks, Westridge, Vista Point and the rest.
Call (805) 697-5483 or send the form at the top of the page. We reply the same day with a time to measure.